MT65xx USB VCOM Drivers Download for Windows ( 32 & 64 Bit)

What is the MT65xx USB VCOM Driver?

The MT65xx USB VCOM Driver is a specialized software component required for Windows computers to recognize and communicate with smartphones powered by MediaTek (MTK) chipsets. Unlike standard USB drivers, VCOM (Virtual COM Port) drivers allow your PC to "talk" to the phone even when it is completely powered off or in a "Preloader" state.

Why do you need this driver?

If you are a mobile technician or an Android enthusiast, you will need this driver for several critical tasks. Without the MT65xx VCOM driver, your computer will fail to detect the phone in the specific mode required for low-level software changes. You specifically need it for:

• Flashing Firmware: To install Stock ROMs using tools like SP Flash Tool.
• Unbricking: To fix phones that are stuck on the boot logo or won't turn on (Dead Boot).
• IMEI Repair: To communicate with the device's NVRAM for signal repair.
• Formatting/Resetting: To bypass screen locks or FRP (Factory Reset Protection) on MTK devices.

Where is this driver used?

This driver is the backbone of almost all MediaTek service software. It is used in conjunction with the following popular tools:

• SP Flash Tool (Smartphone Flash Tool)
• Miracle Box / Miracle Thunder
• CM2 (Infinity Chinese Miracle 2)
• Unlock Tool / Hydra Tool
• MTK Droid Tools

Common Connection Issues Fixed

Have you ever tried to flash a phone and seen the error "USB Device Not Recognized" or watched the device appear in Device Manager for only 2 seconds before disappearing? This happens because the VCOM port is not correctly installed. Installing the MT65xx driver ensures a stable, "handshake" connection between the hardware and the flashing software.

Supported Chipsets

While named after the MT65xx series, these drivers are compatible with a wide range of older and modern MediaTek CPUs, including:

• MT6572, MT6580, MT6582, MT6592
• MT6735, MT6737, MT6753, MT6765
• And many other MTK67xx and Helio series chips.

How to Install MT65xx VCOM Driver (Quick Steps)

Installation on modern Windows (10/11) often requires disabling Driver Signature Enforcement. Once disabled:

1. Open Device Manager on your PC.
2. Click on "Action" and select Add Legacy Hardware.
3. Locate the downloaded driver folder and select the .inf file.
4. Select "MTK USB Port" or "Preloader USB VCOM" from the list and finish the installation.

Note: Always restart your computer after installation to ensure the Virtual COM port is ready for use.